Accessing Additional Functions Via The Pc Interface - Gigaset S79H Manual

Accessing additional
functions via the PC
interface
To enable your handset to communicate
with the PC, the "Gigaset QuickSync"
program must be installed on your PC
(free to download at www.gigaset.com/
gigasets79h).
After installing "Gigaset QuickSync", con-
nect the handset to your computer using a
¢
USB data cable (
Transferring data
Start the "Gigaset QuickSync" program.
You can now:
u
Synchronise your handset Directory
with Outlook
u
Download Caller Pictures (.bmp) from
the computer to the handset
u
Download pictures (.bmp) as a screen-
saver from the computer to the handset
u
Download sounds (ringtones) from the
computer to the handset
During the transfer of data between hand-
set and PC, you will see
progress on the display. During this time
the keypad is disabled, and incoming calls
are ignored.
page 15).
Data transfer in

Accessing additional functions via the PC interface

Completing a firmware update
¤
Connect your phone to your PC using a
USB data cable (
¤
Start the "Gigaset QuickSync" program
on your PC.
¤
Establish a connection to your handset.
¤
Select [Settings]
ties] to open the [Device] tab.
¤
Click on [Firmware update].
This launches the firmware update.
The update process can take up to 10 min-
utes (not including the download time).
Do not interrupt the process or remove
the USB data cable.
The data is initially loaded from the
update server on the Internet. The
amount of time this takes is dependent on
the speed of your Internet connection.
The display on your phone is switched off
and the message key f and the talk key
c start flashing.
Once the update is complete, your phone
will automatically restart.
Procedure in case of an error
If the update procedure fails or your
phone does not work properly following
the update, repeat the update procedure
as follows:
¤
Close the "Gigaset QuickSync" pro-
gram on the PC.
¤
Remove the USB data cable from the
telephone.
¤
Remove the battery (
¤
Replace the battery.
¤
Complete the firmware update as
described.
¢
page 15).
¢
[Device proper-
¢
page 9).
51