Table of Contents
Advertisement
Switching the ringtone on/off
Switching the ringtone off permanently
Use the
key to set the Profile Silent . . . The following icon appears in the status bar:
or: Enable "Do not disturb"
Audio Settings
Switching the ringtone on permanently
Use the
key to set Profile Loud or Profile Personal
Switching the ringtone off for the current call
Silent or press the End call key
Switching the alert tone (beep) on/off
Switch on an alert tone (beep) instead of the ringtone:
Use the Profile key to select
following is shown in the status bar:
Switching off the alert tone:
Switching the silent alert on/off
Incoming calls and other messages are indicated by a silent alert.
Audio Settings
Switching advisory tones on/off
The handset notifies acoustically about different activities and statuses. These advisory tones
can be switched on/off independently of each other.
Audio Settings
Tone when keys are pressed:
Confirmation/error tone after making entries, advisory tone when a new message has been
received:
Warning tone when there are fewer than 10 minutes of talktime remaining
(every 60 seconds):
Warning tone when the handset is moved out of range of the base station:
Save settings:
OK
Do Not Disturb
Profile Silent
Use the Profile
OK
Silent Alert
OK
Advisory Tones
Key Tones:
select On or Off
Confirmation
Battery
select On or Off
Out of Range:
Save
Change (
Press Beep within 3 seconds . . . The
key to change profile
Change (
OK . . . then
select On or Off
select On or Off
Handset
= enabled)
= on)
59
Advertisement
Table of Contents
