Gigaset N210 PRO Manual page 46

Bluetooth
Registering Bluetooth devices
The distance between the handset in Bluetooth mode and the active Bluetooth device (headset
or data device) should not exceed 10 m.
Only one headset / hearing device can be registered. When more than one headset is
found, enable the one required using the checkbox (
Bluetooth
up to 30 seconds) . . . the names of found devices are displayed . . . possible options:
Register device:
Showing information:
Repeat search:
Cancel search:
Editing the list of known (trusted) devices
Open the list
Bluetooth
listed, an icon indicates the type of device
Bluetooth headset
Bluetooth data device
If a device is connected, the relevant icon is shown in the display header instead of
Edit an entry
Bluetooth
options:
View an entry:
De-registering a device:
Deregister all devices:
Edit name:
If an active Bluetooth device is de-registered, it may try to re-connect as a "non-
registered device".
46
OK Search Devices
Options Trust Device
The subsequent process is dependent on the device to which the
connection is being made. Normally, both devices show the same
authentication code.
Confirm the authentication code on both devices . . . The devices
are connected. The device is included in the list of known devices.
Select the device as required
address are displayed, as well as functions possible for this device
Options Repeat Search
Cancel
OK Known Devices
OK Known Devices
View . . . the device name and device address are displayed
Press OK to go back
Options Delete Entry
Options Delete List
Options Edit Name
= enabled).
OK . . . the search starts (may take
OK
View . . . The device name and
OK
OK . . . the known devices are
OK select entry . . . possible
OK
OK
OK edit name
.
Save