Gigaset N210 PRO Manual page 29

Copying individual entries
select the desired entry
OK select the receiving handset
Copy the next entry after successful transfer:
Copying the entire directory
Options
handset OK . . . the entries are copied one after the other
Copying a vCard using Bluetooth
Copy directory entries in vCard format, e.g. to exchange entries with a mobile phone.
Bluetooth mode is activated
The other handset/mobile phone supports Bluetooth.
select an entry if needed
Bluetooth . . . the Known Devices list is displayed
Receiving a vCard using Bluetooth
If a device in the Known Devices list sends a vCard to your handset, a directory entry is automat-
ically created and a message is shown in the display.
If the sending device is not in the list:
device OK . . . the copied vCard is available as a directory entry
Synchronising the phonebook with the PC address book
(Gigaset QuickSync)
The Gigaset QuickSync programme has been installed on the computer.
The handset is connected via Bluetooth or via a USB data cable to the computer.
Free download and further information at
Options
OK . . . the entry is copied
Copy all OK
Options
use
gigaset.com/quicksync
Copy entry
Press Yes or No
to Internal OK
Copy entry / Copy all
select device
to enter the PIN of the sending Bluetooth
Directory
OK to Internal
select the receiving
vCard via
OK
29