Table of Contents
Advertisement
Check memory
Display the available memory for screensavers and CLIP-pictures.
Additional Features
Capacity
OK . . . the percentage of available memory is displayed
Bluetooth
The handset is able to use Bluetooth™ to communicate wirelessly with other devices that also
use this technology, e.g. to connect a Bluetooth headset or hearing aid.
Bluetooth is activated and the devices have been registered to the handset.
The following devices can be connected:
•
A Bluetooth headset or hearing aid
The headset / hearing aid has the Headset or Handsfree profile. If both profiles
are available, the handsfree profile is used to communicate.
It may take 5 seconds to establish a connection to the headset, whether a call is accepted
using the headset or transferred to the headset, or a call is made from the headset.
•
Up to 30 data devices (PCs, tablets or mobile phones) for the transmission of address book
entries as a vCard or for the exchange of data with the computer.
In order for telephone numbers to be used further, the area code (international and local area
code) must be saved to the telephone.
Operating Bluetooth devices
Activating/deactivating Bluetooth mode
Bluetooth
If the local area code is still not saved:
When in idle status, the activated Bluetooth mode is indicated on the handset by the
Making a device visible/invisible
When Bluetooth is enabled, the handset is visible to Bluetooth devices in range for 5 minutes. It
is then invisible after this time.
Making a device visible again:
Bluetooth
The
icon in the status bar flashes whilst the handset is visible.
Even when the handset is invisible, requests from devices known as trustworthy are
accepted.
OK
device user guides
OK
Activation
enter local area code
OK
Visibility
Resource Directory
Change (
= activated)
OK
Change (
= enabled)
Bluetooth
OK
icon.
45
Advertisement
Table of Contents
