Controls; Nomenclature; Names Of Buttons; Display Items - Clarion XDZ716 Owner's Manual

3. CONTROLS / LES COMMANDES / CONTROLES
Source unit / Appareil pilote / Unidad fuente
With the SLOPING CONSOLE opened / Avec la CONSOLE INCLINABLE
ouverte / con la consola SLOPING CONSOLE abierta
Display / Afficheur / Visualizador
Note:
Be sure to unfold this page and refer to the front diagrams as you read each chapter.
Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.
Nota:
Cuando lea los capítulos, despliegue esta página y consulte los diagramas.
5
XDZ716

4. NOMENCLATURE

Note:
• Be sure to read this chapter referring to the front diagrams of chapter "3. CONTROLS" on page 5 (unfold).

Names of Buttons

1 RELEAS button ! INFO(infomation) button
2 TITLE button
ISR button
ADJ (adjust) button
" BND (band) button
3 Power button
TOP button
FNC (function) button
# DISP (display) button
4 OPEN button
$ LOUD (loudness) button
EJECT button
A-M (audio mode) button
5 PS/AS (preset scan/auto store) button
% SEARCH button
SCN (scan) button
& Play/pause button
6 RPT (repeat) button
ENT (enter) button
7 RDM (random) button
( Rotary knob
8 BEQ(Beat EQ) Button
) CD insertion slot
9 Preset button (1 to 6)
Direct button (1 to 6) (7 to 12)

Display Items

(Function mode)
1 Operation status indication % Disc indication
& Scan indication
*Title, clock, etc. are displayed.
2 BEQ indication (BEQ: Beat EQ) ( Parametric egualizer indication
3 Professional mode indication
) Repeat indication
4 VSE indication (VSE: Virtual Space Enhancer) ~ Graphic egualizer indication
5 DSF indication (DSF: Digital Sound Field) + Random indication
6 STD mode indication (STD: Standard) , Manual indication
7 DAB indication - Operation status indication
8 Alternative freguency indication
*The frequency, play time, etc.
9 Traffic announcement indication . Preset channel indication (1 to 6)
! Traffic programme indication
Disc number indication (1 to 12)
" Programme type indication / Stereo indication
# Infomation indication : Loudness indication
$ Clock (Clock indication) etc.
(A mode, FADER, BALANCE, etc. indications)
LCD Screen
In extreme cold, the screen movement may slow down and the screen may darken, but this is nor-
mal. The screen will recover when it returns to normal temperature.
6
XDZ716

5. DCP

The control panel can be detached to prevent theft. When detaching the control panel, store it in the
DCP (DETACHABLE CONTROL PANEL) case to prevent scratches.
We recommend taking the DCP with you when leaving the car.
Removing the DCP Attaching the DCP
1. Insert the DCP so that the A section on the
1. With the SLOPING CONSOLE closed, turn
right side of the DCP catches on the hook B
off the power.
on the unit.
2. Press the RELEASE button 1 deeply to open
the DCP.
RELEASE button 1
2. Press the left side of the DCP carefully to fit it
in place.
3. Pull the DCP toward you and remove it.
• The DCP can easily be damaged by shocks.
After removing it, be careful not to drop it
or subject it to strong shocks.
• If the RELEASE button 1
the DCP is not locked into place, it may fall
DCP out from vibration of the car. This can break
the DCP, so after removing it, either install
it on the unit or put it in its DCP case.
• The connector connecting the unit and the
CAUTION
DCP is an extremely important part. Be care-
ful not to damage it by pressing on it with
• Always close the SLOPING CONSOLE be-
fingernails, screwdrivers, etc.
fore removing the DCP.
Note:
• If you remove the DCP with the SLOPING
• If the DCP is dirty, wipe off the dirt with a soft, dry
CONSOLE open, the sloping console closes
cloth only.
immediately. Be careful not to get your fin-
gers caught.
CAUTION
1 is pressed and 1 1
1
7
XDZ716