Clarion XDZ716 Owner's Manual page 15

Digital Radio / DAB Operations
Manual memory
The main unit has a manual memory function
for DAB programmes. Up to 18 programmes
(6 programmes each) can be preset in the pre-
set buttons.
[M1], [M2] and [M3]
1. Press FNC button 3 to select DAB mode.
2. Press BND button " to select any one shown
above.
3. Press the right or left SEARCH button % to
select a desired programme.
4. Press and hold one of Preset buttons (1 to 6) 9
for 2 seconds or longer to store the programme.
Note:
• The interrupt programme (PTY or INFO) cannot
be written into a manual memory.
Recalling a preset programme
1. Press FNC button 3 to select DAB mode.
2. Press BND button ". Each time you press
BND button ", the display changes in the
following order:
[M1] [M2] [M3] [M1]...
3. Press one of Preset buttons 9 to recall a
preset programme.
Note:
• Press and hold Preset button 9 for 2 seconds or
longer to store the programme currently being re-
ceived. (Manual memory)
AF function
The AF function switches to a different frequency
on the same network in order to maintain
optimum reception.
The factory default setting is "ON"
If the reception of the current broadcast station
deteriorates, "SEARCHING FOR SAME
STATION" or "SEARCH" appears in the display
and the radio searches for the same programme
on another frequency.
Switching OFF the AF function
Press AF button 6. "AF" in the display goes off
and the AF function turns off.
Switching ON the AF function
Press AF button 6. "AF" in the display lights and
the AF function turns on.
If the reception of the current broadcast station
deteriorates, "SEARCH" appears in the display and
the radio searches for the same programme on
another frequency.
28
XDZ716
TA (Traffic Announcement)
In TA standby mode, when a traffic announce-
ment broadcast starts, the traffic announcement
broadcast is received as top priority regardless
of the function mode. Traffic programme (TP)
automatic tuning is also possible.
This function can only be used when "TP" is lit in
the display. When "TP" is lit, this means that the
DAB broadcast station being received has traffic
announcement programmes.
Setting TA standby mode
If you press TA button ! when only "TP" is lit in the
display, "TP" and "TA" light in the display and the
unit is set into TA standby mode until a traffic an-
nouncement is broadcast. When a traffic announce-
ment broadcast starts, "TRA INFO" appears in the
display. If you press TA button ! while a traffic
announcement broadcast is being received, the
traffic announcement broadcast reception is can-
celled and the unit goes into TA standby mode.
Cancelling TA standby mode
With "TP" and "TA" lit in the display, press TA
button !. The "TA" in the display goes off and
TA standby mode is cancelled.
If "TP" is not lit, pressing TA button ! searches
for a TP station.
Searching for a TP station
When "TP" is not lit, if you press TA button !,
"TA" in the display lights and the unit automati-
cally receives a TP station.
Note:
• If a TP station is not received, the unit continues the
search operation. Pressing TA button ! again goes
off "TA" in the display and stops TP station searching.
INFO (Announcement)
In INFO standby mode, when the selected
announcement programme starts, the main unit
switches to the selected announcement
programme automatically.
Setting INFO standby mode
If you press and hold TA button ! for 1 second
or longer, "INFO" lights in the display and the
main unit is set into INFO standby mode until the
selected announcement is broadcast. When the
selected announcement broadcast starts, the
announcement item appears in the display. If you
press and hold TA button ! for 1 second or
longer while the selected announcement broad-
cast is being received, the selected announce-
ment broadcast reception is cancelled and the
main unit goes into INFO standby mode.
Cancelling INFO standby mode
To cancel INFO standby mode, press and hold
TA button ! for 1 second or longer.
Information select
This is a function for selecting INFORMATION
ON or OFF in Information interrupt mode.
You can set ON up to 6 information items.
You can select any of the 6 items below:
INFORMATION item
ENGLISH Contents
Travel Transport flash
Warning Warning / Service
News News flash
Weather Area weather flash
Event Event announcement
Special Special event
1. Perform the following operation depending on
the connected model.
Press and hold ADJ button 2 for 1 second or
longer.
2. Press the right or left SEARCH button % to
select "INFO SEL", then push ENT button &
to enter "INFO SEL" mode.
3. Press the right or left SEARCH button % to
select an information item. You can select any
of 6 items:
4. Perform the following operation depending on
the connected model.
Tur n the Rotar y knob ( clockwise or
counterclock wise to set the information item
for ON or OFF.
5. Press ADJ button 2 to return to the previous
display.
Digital Radio / DAB Operations
PTY
This function enables you to listen to the selected
programme type, irrespective of the function
mode.
PTY broadcasts are not yet available in all countries.
In INFO standby mode, INFO stations have priority
over PTY stations.
In TA standby mode, TP stations have priority over
PTY stations.
PTY item
ENGLISH Contents
News News
Inform Information
Sports Sports
Talk Talk
Rock Rock
Cls Rock Classic Rock
Adlt Hit Adult Hits
Soft Rck Soft Rock
Top 40 Top 40
Country Country
Oldies Oldies
Soft Soft
Nostalga Nostalgia
Jazz Jazz
Classicl Classical
R&B Rhythm and Blues
Soft R&B Soft Rhythm and Blues
Language Language
Rel Musc Religious Music
Rel Talk Religious Talk
Persnlty Personality
Public Public
Setting PTY standby mode
When you press PTY button 7, "PTY" lights in
the display and the PTY standby mode is turned
on. When the selected PTY broadcast starts, the
PTY item name appears in the display.
Cancelling PTY standby mode
When you press and hold PTY button 7
for 1
second or longer, "PTY" goes off in the display
and PTY standby mode is cancelled.
Cancelling a PTY interrupt broadcast
Press PTY button 7 during the PTY interrupt
broadcast, the PTY interrupt is cancelled and the
unit returns to PTY standby mode.
29
XDZ716