Related Manuals for Clarion DXZ276MP
Summary of Contents for Clarion DXZ276MP
- Page 1 Owner’s manual DXZ276MP DXZ376MP CD/MP3/WMA RECEIVER WITH CeNET CONTROL 带ＣｅＮＥＴ控制的ＣＤ／ＭＰ３／ＷＭＡ接收器 CD/MP3/WMA 리시버/CeNET 컨트롤...
- Page 2 Thank you for purchasing this Clarion product. Please read this owner’s manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual.
- Page 3 [ IR RECEIVER ] [ DIRECT ] ( 4-6 ) Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter. 注：在阅读各章时请务必展开此页并参考主视图。 주: 이 페이지를 펼쳐두고, 각 장을 읽을 때 전면 그림을 참조하도록 하십시오. DXZ276MP/DXZ376MP...
- Page 4 Bottom View of Source Unit 主机的仰视图 본체의 저면도 DXZ276MP/DXZ376MP...
-
Page 5: Table Of Contents
Operations Common to Each Mode ... 19 7. OPERATIONS OF ACCESSORIES ... 22 iPod BB Operations... 22 CD Changer Operations... 24 DVD Changer Operations ... 25 TV Operations ... 26 8. IN CASE OF DIFFICULTY... 27 9. ERROR DISPLAYS ... 28 10. SPECIFICATIONS ... 29 DXZ276MP/DXZ376MP... -
Page 6: Features
• MP3/WMA compatible with ID3-TAG display • Build-in High-pass filter & Low-pass filter (DXZ376MP) • “Z-ENHANCER” sound customisation & “MAGNA BASS EX” dynamic bass enhancement (DXZ276MP) • High visibility single line display 2. PRECAUTIONS 1. When the inside of the car is very cold and... -
Page 7: Handling Compact Discs
• Do not use any solvents, such as commercially available cleaners, anti-static spray, or thinner to clean compact discs. • After using special compact disc cleaner, let the compact disc dry off well before playing it. DXZ276MP/DXZ376MP... -
Page 8: Nomenclature
[CD SLOT] • CD insertion slot. [AUX] input jack • The input jack for connecting an external device. DXZ276MP/DXZ376MP [IR RECEIVER] • Receiver for remote control unit. (Operating range: 30° in all directions) [ROTARY] knob • Adjust the volume by turning the knob clockwise or counterclockwise. -
Page 9: Display Items
The screen will recover when it returns to normal temperature. Operation status indication Frequency, Titles, Clock, etc. are displayed : Z-enhancer indication : MAGNA BASS EX indication : MUTE indication : Disc or Folder random/ repeat/scan indication : Random indication : Repeat indication : Scan indication DXZ276MP/DXZ376MP... -
Page 10: Dcp
1. Insert the right side of the DCP into the main unit. 2. Insert the left side of the DCP into the main unit. DXZ276MP/DXZ376MP CAUTION • The DCP can easily be damaged by shocks. After removing it, be careful not to drop it or subject it to strong shocks. -
Page 11: Remote Control
• When replacing the battery, insert properly, with +/– polarities oriented correctly. • Do not subject battery to heat, or dispose of in fire or water. Do not attempt to disassemble the battery. • Dispose of used batteries properly. Insertion guide DXZ276MP/DXZ376MP... -
Page 12: Functions Of Remote Control Unit Buttons
ISR memory (radio mode only). [DISP] button • Press to alternate between main display, title display and clock time display. DXZ276MP/DXZ376MP Signal transmitter [ BND ] [ DISP ] [ RDM ] [ RPT ]... - Page 13 • Moves preset channels up and down. [SCN] button • Press to perform preset scan. • Press and hold the button for 2 seconds or longer to perform auto store. [RDM] button • Press to alternate between TV and VTR. DXZ276MP/DXZ376MP...
-
Page 14: Operations
The system check starts within the unit. When the system check is complete, press the [SRC] button again. DXZ276MP/DXZ376MP Selecting a mode 1. Press the [SRC] button to change the operation mode. -
Page 15: Sound Adjustment
The factory default setting is “CENTER” (center). (Adjustment range: RIGHT12 to LEFT12 (right 12 to left 12)) ] button. ] button to return to previous ] button. ] button to return to previous ] button. ] button to return to previous DXZ276MP/DXZ376MP... - Page 16 The setting changes in the following order: “120Hz” “THROUGH” The factory default setting is “THROUGH” (through). DXZ276MP/DXZ376MP Setting the MAGNA BASS EXTEND The MAGNA BASS EXTEND does not adjust the low frequencies like the normal sound adjustment function, but emphasizes the deep bass frequencies to provide you with a dynamic sound.
-
Page 17: Radio Operations
1. Press the [BND] button and select the desired band (FM or AM). 2. Press and hold the [ or longer. The stations with good reception are stored automatically to the preset channels. ] button for 2 seconds DXZ276MP/DXZ376MP... -
Page 18: Preset Scan
• Be careful not to press and hold the [ for 2 seconds or longer, otherwise the auto store function is engaged and the unit starts storing stations. DXZ276MP/DXZ376MP Instant station recall (ISR) Instant station recall is a special radio preset that instantly accesses a favorite radio station at a touch of a button. -
Page 19: Cd/Mp3/Wma Operations
2. Tracks are played in the order that they were recorded onto a disc. (Tracks might not always be played in the order displayed on the PC.) 3. Some noise may occur depending on the type of encoder software used while recording. DXZ276MP/DXZ376MP... -
Page 20: Ejecting A Cd
It may be impossible to extract these discs from the unit and they may cause the unit to break down. DXZ276MP/DXZ376MP Ejecting a CD 1. Press the [Q] to eject the CD. Take it out from the ejected position. “EJECT” appears in the display. -
Page 21: Pausing Play
The top function resets the CD player to the first track of the disc. Press the [BND] button to play the first track (track No. 1) on the disc. In case of MP3/WMA, the first track of a folder being played will be returned. DXZ276MP/DXZ376MP... - Page 22 This function allows you to play the current track repeatedly. 1. Press the [RPT] button to perform repeat play. “TRK RPT” appears in the display. DXZ276MP/DXZ376MP Folder repeat play This function allows you to play a track currently being played in the MP3/WMA folder repeatedly.
-
Page 23: Operations Common To Each Mode
Then press and hold the button for 2 seconds or longer to store the message and the message return to default setting. “ON” “OFF” ] button. Numbers Symbols ] button for 2 [BND ] button for 1 DXZ276MP/DXZ376MP... - Page 24 • LEFT: Telephone calls can be heard on the front left speaker connected to this unit. DXZ276MP/DXZ376MP Cellular phone interrupt setting If you connect this unit and your cellular phone with a separately sold cable, you can listen to your telephone calls on your car speakers.
-
Page 25: Entering Titles
The factory default setting is “MID”. 1. Press and hold the [D] button for 1 second or longer. 2. Select “AUX SENS”. 3. Press the [w] or [z] button to select “LOW”, “MID” or “HIGH”. Symbols ] button. ] button for 2 seconds DXZ276MP/DXZ376MP... -
Page 26: Operations Of Accessories
CD mode: Track selection: [x], [v] Fast-forward/fast-backward: [x], [v] Pause: [ See “CD/MP3/WMA Operations” (page 15-18) for details. DXZ276MP/DXZ376MP Other various play functions (in Play mode) Notes: • These functions are not supported when in the iPod menu mode. - Page 27 This unit supports the display of title information transmitted from a connected iPod. • Character code information is UTF-8; displayable characters include English alphanumerics, some symbols, and some umlaut characters. • Unsupported characters will be replaced by asterisks (*). DXZ276MP/DXZ376MP...
-
Page 28: Cd Changer Operations
• If a CD-text CD is not input its disc title or a track title, “NO TITLE” appears in the display. DXZ276MP/DXZ376MP Procedure to scroll a title Set “SCROLL” to “ON” or “OFF”. (The factory default setting is “ON”. Refer to the subsection “Setting the method for title scroll”... -
Page 29: Dvd Changer Operations
Note: • The following operations are the same as for CD and CD Changer modes: Pause Track selection Fast-forward/fast-backward Scan play Repeat play Random play See “CD/MP3/WMA Operations” (page 15-18) and “CD Changer Operations” (page 24) for details. DXZ276MP/DXZ376MP... -
Page 30: Tv Operations
VTR”. 6. Press and hold the [ ] button for 1 second or longer to set to “TV”. DXZ276MP/DXZ376MP Setting the TV Area When you select the TV area (TV reception area) TV tuner area setting changes. 1. Press and hold the [D] button for 1 second or longer to switch to the adjustment selection display. -
Page 31: In Case Of Difficulty
Clean the compact disc with a soft cloth. Replace with a compact disc with no scratches. Use MP3/WMA files encoded properly. Let dry for about 1 hour with the power on. Use ISO9660 level 1, 2 or JOLIET or Romeo file system. Measure Reset button DXZ276MP/DXZ376MP... -
Page 32: Error Displays
If an error display other than the ones described above appears, press the reset button. If the problem persists, turn off the power and consult your store of purchase. DXZ276MP/DXZ376MP Cause This is a failure of CD deck’s mechanism and consult your store of purchase. -
Page 33: Specifications
Bass Control Action (100 Hz): +14 dB, –14 dB Treble Control Action (10 kHz): +14 dB, –14 dB Line Output Level (CD 1 kHz): DXZ376MP: 3.6 V DXZ276MP: 1.8 V Note: • Specifications and design are subject to change without notice for further improvement. General Power Supply Voltage: 14.4 V DC (10.8 to 15.6 V allowable), negative... - Page 34 DXZ276MP/DXZ376MP...
- Page 35 Clarion Co., Ltd. PE-2908K-A/B PE-2907K-A/B All Rights Reserved. Copyright © 2006: Clarion Co., Ltd. 2006/12 280-8489-00...