Ac Operation - Honda EG5000X Owner's Manual

AC OPERATION

1. Start the engine (see page
2. Turn the voltage selector sw itch to either position.
With the voltage selector sw itch in the ''120/240V'' position, you can
use the 120V and 120/240V receptacles sim ultaneously. If you are NOT
using the 120/240V receptacle but require m ore pow er from the 120V
locking plug receptacle, then select the ''120V ONLY'' position.
3. Sw itch ON the AC circuit breaker.
4. Plug in the appliance.
M ost m otorized appliances require m ore than their rated w attage for
startup.
Do not exceed the current lim it specified for any one receptacle. If an
overloaded circuit causes the AC circuit breaker to sw itch OFF, reduce
the electrical load on the circuit, w ait a few m inutes and then reset the
AC circuit breaker.
24 ).
VOLTAGE SELECTOR
SWITCH
AC CIRCUIT
BREAKER
17