Fluke PM6690 Service Manual page 111

Calibration of Internal Delays
Initializes the calibration process.
Calibration of Internal Delays
Starts the calibration process.
Calibration of Internal Delays
Ends the calibration process and stores the calibration factors.
Calibration of Reference Oscillator
Selects the reference frequency used for the timebase calibration. AUTO is automatically set to OFF.
Parameters:
<Numeric value> = (1E+6 | 1.544E+6 |2.048E+6 | 5E+6 | 10E+6)
Returned format: <Numeric value>¿
*RST condition: Not affecting this setting
:CALibration :DELays :INITialize
:CALibration :DELays :STARt
:CALibration :DELays :STORe
:CALibration :ROSCillator :FREQuency
8<Numeric value>
Voltage Reference 7-7