Replacing A Double-Size Nif With A Single-Size Nif - Hitachi GR4000 Series Installation Manual

GR4000 Installation Guide Version 1.00 - Preliminary

5.7.4 Replacing a double-size NIF with a single-size NIF

WARNING: THE REPLACEMENT OF A NETWORK INTERFACE BOARD SHOULD BE
!
Step 1
double-size NIF, see the section 5.7.2.）
Step 2
unit, see the section 5.6.）
Step 3
Guide rail
Figure 5.7-13 Guide rail being attached to a packet routing unit
200
DONE BY A TRAINED ENGINEER OR A QUALIFIED MAINTENANCE PERSON.
Caution: Do not touch the electronic components on the solder side of a network
interface board. To avoid damage, always store these components in approved
anti-static bags.
Remove a double-size network interface board.（As for the detachment of a
Remove a packet routing unit.（As for the detachment of a packet routing
Attach a guide rail to a packet routing unit.
Packet routing unit
520-10-014-20X