GR4000 Installation Guide Version 1.00 - Preliminary
(2) Attachment of a packet routing unit
Step 1
the slot.
Slot for a packet routing unit
Lever
Figure 5.6-4 Packet routing unit being inserted into the slot
!
!
188
Open the levers of the packet routing unit as shown in the figure below, and insert it into
Caution: Do not hold the area marked with
or removing a packet routing unit from GR4000 models. Doing this might deform
the outer frame of a packet routing unit, and NIF might be damaged if you try to
insert it into a packet routing unit with its deformed outer frame.
Caution: When installing a packet routing unit into the device, open its levers as shown
in the figure above. If you try to install it with its levers shut or open too wide, its
levers might be damaged when being inserted into the slot
レバー
Packet routing unit
in the figure above when mounting
520-10-014-20X