Attachment/Detachment Of Sfp - Hitachi GR4000 Series Installation Manual

Figure 4.7-5 GBIC (type B/type C) being removed
4.8

Attachment/Detachment of SFP

*
(1) Attachment of SFP
Insert the SFP into the Ethernet port until it clicks with its lever pushed up.
Lever SFP
Figure 4.8-1 SFP being attached
(2) Detachment of SFP
Turn down the lever of the SFP to the horizontal position and pull the SFP towards you
holding its lever.
Lever SFP
Figure 4.8-2 SFP being removed
520-10-014-20X
NOTE: You can attach or remove the SFP to and from the network interface
module (NIF) even though it is installed into the device which is powered
on.
Network interface module
Ethernet port
GR4000 Installation Guide Version 1.00 - Preliminary
133