Section 15. Filters - Trane GAF2A0A36S3AEC Installer's Manual

STEP 6 - Reinstall all panels before starting the air
handler.
NOTE: After replacing all panels, loosen the Line
Set Panel screws approximately 1/4 - 1/2 turn. This
will improve the seal between the Heater Panel and
Line Set Panel.

Section 15. Filters

15.1 Filter Considerations
GAM2 air handlers
• A filter must be installed within the system.
• A filter channel is provided in the unit, at the bot-
tom of the Blower/Filter compartment.
• For customer ease of fil ter maintenance, it is
recommended that a properly sized remote filter
grill(s) be installed for units that are difficult to
access. Airflow should not exceed the maximum
rated velocity of the filter being used.
Table 15.1 GAM2 Filter Sizes
Cabinet Size*
Filter Size
* Cabinet size is indicated by the 7th digit in
model number.
GAF2 air handlers
• Since a filter option is not included within the air
handler, a remote filter must be installed with the
system.
• For customer ease of fil ter maintenance, it is
recommended that a properly sized remote filter
grill(s) be installed for units that are difficult to
access. Airflow should not exceed the maximum
rated velocity of the filter being used.
• A bottom return filter kit BAYBRFBX100 or a front
return filter kit BAYFRKIT100 may be installed.
C
22 x 20
Filter in GAM2
air handler
cabinet
(Upflow
Application)
Table 15.2 GAF2 Filter Sizes
Accessory Kit*
BAYBRFBX100
BAYFRKIT100
*Kits are for GAF2 one piece A Cabinets. Cabinet
size is indicated by the 7th digit in model number.
Filter Size
16" x 20"
16" X 16"
33