Backup Recording; Menu Screens; Menu Screen Configuration - JVC GY-HD110U Instructions Manual

USING EXTERNAL COMPONENTS

Backup Recording

1.
IEEE1394 switch
IEEE 1394
HDV
DV
Backup unit
Master unit
GY-HD110
Signal flow IEEE1394 cable
CAUTION
• Set the IEEE1394 switch on both devices to either HDV
or DV.
• Start recording after making sure that both devices are
properly connected.
• If the RET button is pressed during backup recording,
output from the IEEE1394 terminal is stopped, the image
is switched to the image recorded on this unit, interrupting
the backup recording image.
OTHERS [2/2] menu screen
60
Backup Recording of the GY-HD110's
Camera Image and Sound Through the
IEEE1394 Connector
The GY-HD110's camera image and sound can be recorded
for backup on another component that is equipped with
IEEE1394 connector.
Connections
Use the GY-HD110 as the master unit.
Connect the master unit and the backup unit with a IEEE1394
cable.
Settings
Master unit (GY-HD110)
1.
Set the IEEE1394 switch on left side of the GY-HD110.
DV : When backup in DV format
HDV : When backup in HDV format
2.
Place in Camera mode.
3.
Set the 1394 REC TRIGGER item on the OTHERS [2/2]
menu screen. X See page 81.
For HDV mode, set the BACK SPACE [HDV] item.
X See page 81.
Backup unit
• Place in HDV/DV signal input mode.
* Depending on the used component, it may be necessary
to set "REMOTE SELECT".
• When BR-HD50 is used, set the Backup Recording func-
tion to OFF.
• Insert the tape and set to STOP or REC PAUSE status.
Operation
Start and stop of recording on the backup unit takes place in
accordance with the operation of the REC/VTR trigger button
on the master unit.
(Depending on the GY-HD110 or the backup unit, the image,
audio, and/or time code may deviate from what they should
be at the points where the recording is started or stopped.)
MEMO
• When the backup recording is started, the "TRIGGER TO
DV" or "TRIGGER TO HDV" indication is shown on the
LCD or in the viewfinder for approx. 3 seconds.
• When the Series Recording function of BR-HD50 is used,
the GY-HD110's 1394 REC TRIGGER item should be set
to OFF.
• If the backup device is equipped with a feature to record
time codes input from the IEEE1394 connector (TC
DUPLICATE feature), time code data the same as on the
master side can be recorded.
• When using BR-HD50 as a backup device and switching
GY-HD110 from the playback mode to the record mode,
noise will be noticed on the monitor output screen of BR-
HD50 (backup will be correctly recorded).

MENU SCREENS

Menu Screen Configuration

The Menu Screen consists of multiple layers of menu screens as shown below. The menu screen to be set is selected from the
TOP MENU in accordance with the function or purpose.
The items on the menu screens differ with the Camera mode and the VTR mode. The contents of set items are stored in the GY-
HD110's memory and are retained even when the power is turned off.
The FILE MANAGE menu screen can be used to store the menu setting contents on the GY-HD110 or SD memory card.
TOP MENU screen (CAM)
TOP MENU screen (VTR)
61