Setting The Date And Time; Displaying The Time And Date On The Screen; Displaying Time Code - JVC GY-HD110U Instructions Manual

PREPARATIONS FOR OPERATION
Setting and Displaying the Date and Time (Cont'd)
1.
TIME/DATE menu screen
2.
CLOCK ADJUST menu screen
Date
Time (Hour:Min)
Date Time
38

Setting the Date and Time

1.
Display the CLOCK ADJUST menu screen.
Select the CLOCK ADJUST item on the TIME/DATE
menu screen.
2.
Set the date and time.
The blinking digit is the one to be set.
1When the SHUTTER dial is pressed, the blinking digit
moves to the next digit.
2When the SHUTTER dial is rotated, the value of the
blinking digit changes.
When the SHUTTER dial is rotated upward, the value
becomes higher. When rotated downward, the value
becomes smaller.
3Repeat the procedure described in 1 and 2 above to
set the day, month, year, hours, minutes.
The digits indicating seconds cannot be set.
4Press the SHUTTER dial in sync with a time signal to
enter the date and time precisely.
3.
When all the settings are completed, rotate the SHUTTER
dial to align the cursor with the PAGE BACK item, and
then press the SHUTTER dial.
• The TIME/DATE menu screen returns.
4.
To return to the normal screen, use either of the following
methods.
Press the STATUS button
or
Return to the TOP MENU screen and then select the
EXIT item on the TOP MENU screen before pressing the
SHUTTER dial.

Displaying the Time and Date on the Screen

Whether or not the time and date should be displayed on the screen
and how to display them are set on the TIME/DATE menu screen.
1.
Display the TIME/DATE menu screen.
1Select the TC/UB/CLOCK item on the TOP MENU screen.
2Select the TIME/DATE item on the TC/UB/CLOCK
menu screen.
2.
Set the TIME/DATE menu screen.
• DISPLAY item : Sets whether or not date and time
should be displayed.
Set to ON to display the indications.
• DISPLAY MODE : Sets the video output mode in which
item date and time should be displayed.
BARS : Displayed when outputting the color bar.
CAM : Displayed when outputting the color
camera image.
BARS+CAM : Date and time are always displayed.
• DISPLAY : Sets the style in which the date and
STYLE item time are displayed.
DATE+TIME : Date and time are displayed.
DATE : Date only is displayed.
TIME : Time only is displayed.
Display of date and time in the various operation modes.
In Camera mode : The date and time of the internal
clock are displayed.
In VTR playback mode : The date and time recorded on the
tape are displayed.
In VTR stop mode : The last read date and time values
are displayed.
When an HDV/DV sig- : The date and time of the DV input
nal is input from the are displayed in DV format. The
IEEE1394 connector date and time of the internal clock
are displayed in HDV format. (GY-
HD110U/GY-HD111E only)

Displaying Time Code

1.
LCD/VF [2/3] menu screen
2.
TC DISPLAY switch TC GENE. switch
Time code indication
(Example)
Time code indication
00:00:00:00
User's bits indication
FF EE DD 20
STATUS 1 screen
PREPARATIONS FOR OPERATION
The GY-HD110 records SMPTE-standard (NTSC) or EBU-
standard (PAL) time codes and user's bits. In the play mode
or the record mode, the reproduced time codes or user's bits
are shown on the LCD monitor or in the viewfinder.
• Time code data cannot be output through the unit's con-
nectors.
The time codes or user's bits can be shown on the LCD mon-
itor or in the viewfinder during playback and recording as fol-
lows. (Status screen)
Setting
1.
Set the TC/UB item on the LCD/VF [2/3] menu screen to
ON.
• Time codes or user's bit data are displayed on the STA-
TUS screen.
2.
Whether time codes or user's bit data should be displayed
is selected with the TC DISPLAY switch inside the LCD
door.
TC : Time codes are displayed.
UB : User's bit data is displayed.
Time code input entered the IEEE1394
connector (GY-HD110U/GY-HD111E only)
Pressing the STOP button for 1 second in the EJECT or
stop mode displays the DV input time code data or user's
bit data from the IEEE1394 connector on the STATUS
screen.
DTCG : The time code data from the IEEE1394 connector
DUBG : The user's bit data from the IEEE1394 connector
To return to display of the original time code or user's bit,
press the STOP button. (Display of the normal time code
or user's bit is also restored by performing VTR opera-
tion.)
MEMO
• To record DV input time code and user's bit from the
IEEE1394 connector, set the TC DUPLI. item on the TC/
UB/CLOCK menu screen to ON.
X See page 77.
• To maintain the continuity of time code data, use with the
TC GENE. switch set to REGEN mode when recording
DV input signal from the IEEE1394 connector.
• There is no timecode display for HDV input.
CAUTION
A time code with a duration of more than 2 hours may not be
displayed correctly by DV components for general con-
sumer use, as some of these lack the capability to display
longer time codes.
39