JVC GY-HD110U Instructions Manual page 16

CONTROLS, INDICATORS AND CONNECTORS
Indications on the LCD Monitor and in the Viewfinder (Cont'd)
Magnified Status Indications on the LCD Monitor
The characters on the status screens can be showed alone in magnified size on the LCD monitor.
* When this unit is being operated with an Anton Bauer battery or IDX battery, characters are displayed in magnified size.
DISPLAY button
1.
Set the LCD+VF item on the LCD/VF [3/3] menu screen to ON. (X See page 76.)
2.
When the DISPLAY button is pressed for a short time while the LCD monitor is displayed, the displayed contents change
every time the DISPLAY button is pressed. (Only when operating the GY-HD110 with the Anton-Bauer or IDX battery).
Only image displayed Characters shown enlarged
Image and characters displayed
No. Item
1 Audio Lock Indicator Displayed during recording and playback when the audio signal is locked to the video signal.
2 Time Code Generator Setting Indicates the set status of the TC GENE switch on the side section.
Indicator FREE : TC GENE switch is set to PRESET-FREE RUN MODE.
RECR : TC GENE switch is set to PRESET-REC RUN MODE.
REGN : TC GENE switch is set to REGEN MODE.
DUPL : There is 1394 input in VTR mode and TC DUPLI. menu is set to ON.
3 Drop/Non-drop Indicator Displayed during playback of a tape recorded in drop frame or non-drop frame mode.
DF : During playback of a tape recorded in drop frame mode.
NDF : During playback of a tape recorded in non-drop frame mode.
4 Indication of DR-HD100 Oper- When a DR-HD100 (HDD unit by FOCUS enhancements) is connected, its operation status is displayed.
ation (For details, refer to the DR-HD100 INSTRUCTION MANUAL.)
MEMO
When characters indicating the status are displayed in magnified size on the LCD monitor, the viewfinder display the image.
26
1
4
266S DD
2
3
Contents
CONTROLS, INDICATORS AND CONNECTORS
TOP MENU screen (Camera mode)
Alarm display area
Safety Zone Indication (Camera mode only)
The indication of the following safety zone and center mark indications can be turned ON/OFF with the SAFETY ZONE item and
CENTER MARK item on the LCD/VF [1/3] menu screen. X See page 74.
In addition, the safety zone display is on or off depending on the REC item setting and the ASPECT item setting in the VIDEO
FORMAT menu screen, as shown below.
SAFETY ZONE OFF 4:3
CENTER MARK - OFF ON
REC ASPECT
DV-60I
DV-24P
4:3
DV-24PA
DV-50I
16:9
DV-25P
HDV-SD60P
HDV-SD50P
HDV-HD30P [16:9]
HDV-HD25P
HDV-HD24P
Auto White Balance Indication (Camera
mode only)
The AUTO WHITE indication and the result of the operation
are displayed during the auto white balance adjustment oper-
ation.
X See "White Balance Adjustment" on page 45.
Menu Setting Screen
Screen used for making various settings.
The Menu Setting Screen appears when the STATUS button
is pressed for 1 second or more.
X See "Setting Menu Screens" on page 62.
Alarm Message Display
• The following alarm messages are displayed while the
STATUS (0, 1, 4) screen is shown in the Camera mode, or
a STATUS screen is shown in the VTR mode.
If an alarm is generated while the STATUS 2, 3 screen is
shown, the STATUS 0 screen returns to display the alarm.
X See page 89.
• When an abnormality occurs in the VTR, a warning mes-
sage with an error code is displayed.
X See page 89-90.
14:9 16:9 16:9+4:3
OFF ON OFF ON OFF
Cannot be selected
ON
27