Setting And Adjustments Before Shooting; Setting The Video Format; Camera Settings; Screen Size (4:3/16:9) Mode Selection - JVC GY-HD110U Instructions Manual

SETTING AND ADJUSTMENTS BEFORE SHOOTING

Setting the Video Format

SHUTTER dial
STATUS button
46
Set the video format using the FRAME RATE item and the
REC item on the VIDEO FORMAT menu screen.
Setting the FRAME RATE Item
1.
Press the STATUS button for at least 1 second.
• The TOP MENU screen is displayed.
2.
Turn the SHUTTER dial and bring the cursor (K) to the
VIDEO FORMAT.. item and press the SHUTTER dial.
• The VIDEO FORMAT menu screen is displayed.
3.
Turn the SHUTTER dial and bring the cursor (K) to the
FRAME RATE item and press the SHUTTER dial.
• The setting for the selected item flashes and can be
changed.
"CHANGE THE SYSTEM" is displayed on the screen.
4.
Turn the SHUTTER dial, change the setting and push the
SHUTTER dial.
• The setting stops flashing and is temporarily set.
• Move the cursor (K) to the EXECUTE item and EXE-
CUTE flashes.
5.
Push the SHUTTER dial.
• "REBOOT! SYSTEM CHANGE" is displayed on the
screen and after a few seconds the system is rebooted.
Setting the REC Item
Set the REC item using the same steps as for the FRAME
RATE item.
MEMO
• If you change the FRAME RATE item setting, the system
is rebooted.
• The synchronous video signal is momentarily disturbed
when the REC item setting is switched.
About the Motion Smooth Function
When you set the MOTION SMOOTH item on the CAMERA
PROCESS [2/2] menu screen to ON with the REC item set to
HDV-HD30P, HDV-HD25P or HDV-HD24P, the video can be
played back more smoothly than with normal progressive
video. X See page 68.
This function is only enabled during playback. It is not avail-
able during live output or shooting.
SETTING AND ADJUSTMENTS BEFORE SHOOTING

Camera Settings

VTR indicator
4.
3.
1.
A
B
CAM/VTR button

Screen Size (4:3/16:9) Mode Selection

ASPECT item
4:3 4:3 TV
16:9 TV
16:9 4:3 TV
[SQUEEZE]
4:3 TV
[SIDE CUT]
4:3 TV
[LETTER]
16:9 TV
1.
Set the switch positions.
A. [GAIN] switch: Set to L ( 0 dB).
B. [WHT. BAL] (Auto White Balance) switch: Set to A or B.
2.
Set the lens' iris mode switch to "A" (Auto iris side).
3.
Select the ND filter.
ND FILTER Suitable Location
OFF OFF Indoors, dark outdoors
1 1/4ND Outdoors under clear sky
2 1/16ND Outdoors under extremely clear sky
4.
Set the shutter speed to OFF with the SHUTTER dial.
The screen size of recorded images can be selected with the
ASPECT item on the VIDEO FORMAT menu screen.
X See page 64.
• To record using the standard screen, set ASPECT to 4:3.
• To record using the 16:9 screen, set ASPECT to 16:9.
MEMO
• When you set the REC item on the VIDEO FORMAT
menu to HDV format, the ASPECT item is fixed at 16:9
and "[16:9]" is displayed.
• If the above applies, you can set to display the image in
the style of 4:3 televisions.
X See page 64.
• In the SAFETY ZONE item on the LCD/VF [1/3] menu
screen, you can display the safety zone for a standard
screen as well as a 16:9 screen in the viewfinder or LCD
monitor.
X See page 74.
• When the ASPECT item is set to 4:3, the screen that is
displayed may differ depending on the 16:9 television you
are using.
47