JVC GY-HD110U Instructions Manual page 14

CONTROLS, INDICATORS AND CONNECTORS
Indications on the LCD Monitor and in the Viewfinder (Cont'd)
1 2
3
7
0
4
9
8 6 5
STATUS 1 Screen
• STATUS 1
In addition to the information on the STATUS 0 screen, this screen displays the following items.
No. Item
1 VIDEO FORMAT display Displays the currently selected video format.
Allows you to select the REC item on the VIDEO FORMAT menu screen. X See page 64.
You can switch this display ON/OFF using the FORMAT item on the LCD/VF [2/3] menu screen.
X See page 75.
2 Time Code (TC)/User's Bits Indicates the time code (h:m:s:frame) or user's bits data.
(UB) indication
(Example) Time code TC 00 : 00 : 00 : 00
User's bits UB FF EE DD 20
Whether or not to display this item is set with the TC/UB item on the LCD/VF [2/3] menu screen.
X See page 75.
Whether the time code or user's bits should be shown is selected with the TC DISPLAY switch inside the
LCD door.
3 Remaining tape indication Remaining tape indication (displayed in 1-minute steps)
This indicator blinks when remaining tape time is equivalent to less than 3 minutes.
Whether or not to display this item is set with the TAPE REMAIN item on the LCD/VF [2/3] menu screen.
X See page 75.
* When inserting a brand-new tape, the remaining tape time is not indicated.
When the tape has been run, the indication will appear.
* The remaining tape indication is to be regarded only as a guide.
* When the unit is used at low temperatures, it may take a while before the indication of the remaining tape
time appears.
4 Voltage indication (Example) 7.0V: Indicates remaining battery level in 0.1V steps.
22
Contents
Colon (:) when non-drop frame mode
Dot (.) when drop frame mode
CONTROLS, INDICATORS AND CONNECTORS
No. Item
5 Audio sampling frequency in- 32 K : Indicated when the AUDIO MODE item on the AUDIO/MIC [1/2] menu screen is set to 32 K. (Au-
dication dio is recorded with 12-bit, 32 kHz sampling.)
48 K : Indicated when the AUDIO MODE item on the AUDIO/MIC [1/2] menu screen is set to 48 K. (Au-
dio is recorded with 16-bit, 48 kHz sampling.)
X See page 72.
6 Audio level meter indication Displays the CH-1, CH-2 audio level meters.
Whether or not to display this item is set with the AUDIO item on the LCD/VF [2/3] menu.
X See page 75.
7 Standard audio level indication The level at which audio is recorded on the tape is indicated by "O".
–20 dB, –12 dB
X See "AUDIO REF.LEVEL" on page 72.
CH-1
CH-2
M: Iris set higher than normal
8 Iris indicator display
b: Iris set to normal
N: Iris set lower than normal
9 Iris F-value indication Indicates the F-number of the connected lens.
OPEN, F2, F2.8, F4, F5.6, F8, F11, F16, CLOSE
It is not displayed when the lens is removed. For some lenses, no display appears.
The indication can be switched ON/OFF with the F.NO/IRIS IND. item on the LCD/VF [1/3] menu screen.
X See page 74.
0 Filter position indication Indicates the current filter position.
No display: FILTER OFF
ND1: FILTER ND1 (1/4ND)
ND2: FILTER ND2 (1/16ND)
The indication can be switched ON/OFF with the FILTER item on the LCD/VF [1/3] menu screen.
X See page 74.
Contents
–20 dB –12 dB
O O
O O O O O O O O O \ \ \ ]
O O O O O O O O O \ \ \ ]
23