Table of Contents
Advertisement
5. Click Add IF Cable. (Figure 8)
Figure 8 AeroSDK Setting Tool – IF Cable
Registration
The Konica Minolta AeroSDK Setting Tool:
IF Cable Registration screen is displayed.
6. Verify that In my Room is selected (Figure
9, item 1).
Figure 9 AeroSDK Setting Tool – IF Cable
Registration
7. In the IF Cable ID field, enter the 16 digit
Sub device ID located on the Device Identity
list form in the IF cable packaging (Figure 9,
item 2).
8. Click OK (Figure 9, item 3).
The KONICA MINOLTA AeroSDK Setting
Tool main screen will become active.
VZ0099HTG201606-1.1
Ultra KDR Panel Configuration and Calibration Guide v1.1
Customer Support
9. On the KONICA MINOLTA AeroSDK
Setting Tool main screen, click Add Panel
(Figure 9).
Figure 10 AeroSDK Setting Tool - Add Panel
The KONICA MINOLTA AeroSDK Setting
Tool –Add Panel is displayed.
Figure 11 AeroSDK Setting Tool - Add Panel
10. Enter the Panel serial number located on
the back of the panel. (Figure 11, item 1).
11. Ensure that G1+/G2 is selected for the
Generation of panel you are using (Figure
11, item 2).
12. Keep the default Wired LAN, Wireless
LAN IP and Subnet mask settings as listed
in Figure 11, items 3, 4, 5, and 6.
1.800.366.5343 –
HCITsupport@konicaminolta.com
6
Ultra
Advertisement
Table of Contents
