Nortel BCM 400 Quick Reference Manual page 2

Call Transfer:
To retrieve a
transferred call:
Conference
A) Establish a three-party conference call.
B) Establish a multi-party conference call (4 or more people; maximum 18).
C) To remove yourself from a conference permanently (unsupervised conference):
Group Listening: Use both the handset and speaker while you are on a call. To avoid electronic
feedback, keep the handset away from the speaker during the call,
Redial: Automatically redials the last external call.
Call Forward: To forward your phone to another extension.
Ring Volume: Volume can also be adjusted any time the phone rings.
NOTE: The
Telephone Quick Reference
1. While on a call, press the Transfer soft key or
2. Dial the desired extension.
3. Wait on the line to announce the call OR simply hang up.
Press the Cancel soft key before hanging up.
1. Make or answer the first call.
2. Put the first call on hold.
3. Make or answer the second call.
4. After the second call is connected, press
5. Press the line or intercom button of the first held call.
6. Press RLS to end the conference call.
1. Follow the steps to establish a three-party conference call.
2. Press the Newcall softkey, or press
Intercom key if your set has one.
3. After the fourth call is answered, press
line.
4. Put the fourth call on hold and repeat steps 2 and 3 to add more calls to
the conference.
5. Press RLS to end the conference call.
1. Press FEATURE 70.
The other two callers remain connected. (Some external lines may not
support this FEATURE.)
1. Press Group Listen key or
2. To Cancel: Press Group Listen key or
1. Press Redial key or
1. Press Call Fwd key or
2. Dial the extension you wish to forward to.
1. Press FEATURE * 8 0.
2. Adjust using the
volume bar also controls the volume of the receiver and the
Page 2 of 4
FEATURE 70.
FEATURE 3.
FEATURE 807. You can also use the
FEATURE 3, and press the held
FEATURE 802
FEATURE# 802
FEATURE 5.
FEATURE 4.
volume bar.
hands free speaker.