Iwatsu DCKT970 Owner's Manual page 28

DCKT970 Owner's Manual
2. Plug and secure the AC Adapter
cord by following steps 2 and 3
of the Standard Wall Plate
Mounting Section.
3. Plug one end of the telephone
line cord into the LINE IN jack
on the Base Unit. Optionally,
plug one end of an IX-12KTD /
S-3 Digital Key Telephone into
the LINE OUT jack. Then place
the telephone cord(s) inside the
molded channel(s) on the bottom
of the Wall Mount stand.
4. Place the Base Unit on the posts
of the wall screws and push
down until it is firmly seated.
5. Plug the other end of the short
telephone cord into a telephone
wall jack.
6. Plug the AC Adapter into a standard 120V AC wall outlet
by following step 7 of the Standard Wall Plate
Mounting.
Charging Unit Wall Mounting
The Charging Unit is also designed to be wall mounted.
Before mounting your charging unit, consider the following:
S
Select a location away from electrical cables, pipes,
or other items behind the mounting location that
20