Iwatsu DCKT970 Owner's Manual page 26

DCKT970 Owner's Manual
4. Plug one end of the short telephone cord into the LINE
IN jack on the Base Unit. Optionally, plug one end of an
IX-12KTD / S-3 Digital Key Telephone into the LINE
OUT jack. Then place the telephone cord(s) inside the
molded channel(s) on the bottom of the Wall Mount
stand.
5. Plug the other end of the short telephone cord into the
modular wall jack.
6. Place the Base Unit on the posts of the wall plate and
push down until it's firmly seated.
18