Setting The Msn For Other Media And Ribbon - Intermec EasyCoder 4420 User Manual

Setting the MSN for Other Media and Ribbon

EasyCoder 4420 and 4440 Bar Code Label Printer User's Manual
C d
4 Click OK.
5 Download your change to the printer by pressing the button to send
command updates to the attached printer.
If you are not using Intermec media and ribbon, or you misplaced your
packaging with the three-digit sensitivity number label on it, you can set
the approximate sensitivity rating. The first column of the Direct Thermal
and Thermal Transfer Media Sensitivity Settings tables list the
approximate sensitivity settings. To achieve acceptable print quality, enter
the three-digit MSN (for example, 800).
If you are unsure of how to set the media sensitivity rating, start with the
highest setting, which provides the lowest energy (800 for thermal transfer
and 700 for direct thermal), and work your way down until you achieve
the best print quality.
Note: The hardware configuration label defines the above parameters.
Individual values vary between printers.
Use the maximum recommended print speed only as a guideline.
Optimize your individual print speed based on your media and the format
that you want to print. If you exceed the maximum recommended print
speed, you may notice reduced print quality.
39
Helvetica CondenseChapter 1 — Getting Started
17