Printer Options; Communications Interfaces; Easylan 10I Interface - Intermec EasyCoder 4420 User Manual

Printer Options

Communications Interfaces

EasyCoder 4420 and 4440 Bar Code Label Printer User's Manual
Factory Default Settings
Configuration
Preamble Character
Postamble Character
Auto-Transmit 1
Auto-Transmit 2
Auto-Transmit 3
Message Delay
Power-Up Mode
Cutter
End-of-Print Skip Distance
Top of Form
Media Sensitivity
Number of Image Bands
Maximum Label Length
Printer Character Set
Label Retract
Label Retract Distance
Print Speed
Label Stock Type
Intercharacter Delay
Storage Memory (standard)
This section contains a list of all the options you can use with the 4420
and 4440 printer along with a brief description. Consult your local
Intermec representative to order any option.
You can order any of these field- or factory-installable communications
interfaces for the printer.

EasyLAN 10i Interface

This option lets you connect the printer to a 10BaseT Ethernet network.
Various network printing protocols are available. For more information,
see the EasyLAN 10i documentation.
Appendix A — Specifications
Default Setting
Disabled
Disabled
Disabled
Disabled
Disabled
0 milliseconds
5 mil Advanced mode (4420)
2.5 mil Advanced mode (4440)
Disabled
100 dots (0.5 in)
20 dots (0.1 in)
470 Direct Thermal/567 Thermal Transfer
3
1000 dots (5 in)
US ASCII
Disabled
0
3 inches per second (ips)
Die-cut
0 ms
128K flash
79