Intermec ColorCoder V4 Installation And Operation Manual page 45

4.16 Windows
Driver
Installation,
cont'd.
Intermec ColorCoder V4 – Installation & Operation Ed. 1
. Installation of the printer driver is started.
11
A message prompting to replace the floppy disk is displayed
during the installation process. Then set the "Printer Driver/
Utility for Windows: disk 2" and click on [OK].
. Upon completion of installation of the printer driver, "BJ
12
LABEL/CARD PRINTER" icon is displayed for the "Printers"
folder. Now the installation of the printer driver has been
completed. Take out the floppy disk.
After completion of the printer driver installation, copy the head
shading data (see next page).
Chapter 4 Installation
44