Table of Contents
Advertisement
Innovative Hearth Products
DRT4000 Series Direct-Vent Gas Fireplaces
5. Place the middle left log #4 (Figure 51) on the setting pins in the middle of the grate (Figure 47).
6. Place the front left forked log #5 over log #4 as shown in Figure 52. One foot will rest between the 2nd and 3rd
bar from the left on the grate.
Figure 54 - Place log #4
4
7. The front right forked log #6 will roll back onto log #4. It has a setting pin which should face out from the rest of
the logs.
8. The upper right forked log #7 is the final log in this process (Figure 54). It rests on the 4th bar, on the setting pin
of log #6 and on log #3.
Figure 56 - Place log #6
Figure 55 - Place log #5
5
Figure 57 - Place log #7
6
Operation
900697-01 01/2017
7
55
Advertisement
Table of Contents
