Table of Contents
Advertisement
Innovative Hearth Products
DRT4000 Series Direct-Vent Gas Fireplaces
Installing the DRT4000 Series 40" and 45" logs
The logs have notches/tabs to assist proper positioning. Upper logs rest on lower logs via notches/tabs. Proper log
placement is critical to prevent sooting. Place the logs in the gaps between flame peaks, so they do not impinge the
flames. Follow the log placement instructions precisely.
NOTE: Do not cover the burner ports.
Table 36 - 40" and 45" Log Sets
1. If necessary, remove the glass door (Page 57).
2. Position the rear log #1 (Figures 44) on the two rear setting pins shown in Figures 43.
Figure 50 - Locate log setting pins
Grate
3. Place the left rear log #2 (Figure 45) over the 2 left pins on log #1 (Figure 44).
4. Place the upper right rear log #3 (Figure 46) over the 2 right pins on log #1 (Figure 44).
Figure 52 - Place log #2
54
5
4
2
1
The setting pins, indicated by the arrows, are for the middle and rear log.
2
6
3
Figure 51 - Place log #1
Figure 53 - Place log #3
Log Number
Description
1
Bottom Rear Log
2
Upper Left Rear Log
3
Upper Right Rear Log
7
4
Middle Left Log
5
Front Left Forked Log
6
Front Right Forked Log
7
Upper Right Forked Log
Catalog number for the entire set:
J8301 - 40"; J8303 - 45"
3
Operation
900697-01 01/2017
1
Advertisement
Table of Contents
