Specifications And Options - Icom IC-V8000 Instruction Manual

Icom ic-v8000: instruction manual
Hide thumbs Also See for IC-V8000:
Table of Contents

Advertisement

I Specifications
GENERAL
• Frequency coverage
:
USA
Asia, CSA
(Central South America)
Australia
Taiwan, Korea
*Guaranteed: 144–148 MHz range only.
• Type of emission
: FM
• Number of memory channels : 207 (incl. 6 scan edges and 1 call)
• Frequency resolution
: 5, 10, 12.5, 15, 20, 25, 30, 50 kHz
• Operating temperature range : –10°C to +60°C; +14˚F to +140˚F
• Frequency stability
: ±10 ppm
• Power supply requirement
: 13.8 V DC ±15%
• Current drain
(at 13.8 V DC: approx.)
Transmit
Receive
• Antenna connector
: SO-239
: 150(W) × 50(H) × 150(D) mm
• Dimensions
(proj. not included)
• Weight (approx.)
: 1.1 kg; 2 lb 7 oz
TRANSMITTER
• Modulation system
: Variable reactance frequency mod.
• Output power
: 75/25/10/5 W*
• Max. frequency deviation
: ±5.0 kHz
• Spurious emissions
: Less than –60 dB
• Microphone connector
: 8-pin modular

SPECIFICATIONS AND OPTIONS

(unit: MHz)
Tx: 144–148/Rx: 136–174*
Tx: 144–148/Rx: 136–174*
Tx/Rx: 144–148
Tx/Rx: 144–146
(–10°C to +60°C)
:
at 75 W
15 A
standby
0.3 A typical
max. audio
1.0 A
(50 Ω)
29
29
5
(W)×2(H)×5
(D) in
32
32
(approx.)
*24/10/5 W only for the Taiwan version.
/±2.5 kHz
(wide)
(narrow)
(600 Ω)
RECEIVER
• Receive system
• Intermediate frequencies
• Sensitivity
(at 12 dB SINAD)
• Squelch sensitivity
(threshold)
• Selectivity (typical)
• Spurious and image rejection : 75 dB typical
• AF output power
(at 13.8 V DC)
• Ext. speaker connector
All stated specifications are subject to change without notice or obligation.
I Options
UT-108
DTMF DECODER UNIT
HM-95/HM-118TAN/TN
HM-118N
HAND MICROPHONE
HM-133V
-
REMOTE
CONTROL MICROPHONE
SP-10
EXTERNAL SPEAKER
OPC-440/OPC-647
OPC-441
SPEAKER EXTENSION CABLE
OPC-1132/OPC-347
OPC-589
ADAPTER CABLE
CS-V8000
CLONING SOFTWARE
OPC-474
CLONING CABLE
: Double-conversion superheterodyne
: 1st: 21.7 MHz, 2nd: 450 kHz
: 0.15 µV typical
: 0.08 µV typical
: 75 dB
/60 dB
(wide)
(narrow)
: More than 2.0 W
at 10% distortion with
an 8 Ω load
: 3-conductor 3.5 (d) mm (
Some versions only.
DTMF MICROPHONES
MIC EXTENSION CABLES
DC POWER CABLES
+ OPC-478
CLONING CABLE
14
")/8 Ω
1
8
13
14
74

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents