Icom IC-V8000 Instruction Manual page 15

y S/RF INDICATORS
➥ Shows the relative signal strength while receiving sig-
nals. (p. 13)
➥ Shows the output power level while transmitting. (p. 15)
u SKIP INDICATOR (p. 41)
Appears when the displayed memory channel is specified
as a skip channel.
i MEMORY INDICATOR (p. 24)
Appears when memory mode is selected.
o MEMORY CHANNEL NUMBER INDICATORS
➥ Shows the selected memory channel number. (p. 24)
➥ "C" appears when the call channel is selected. (p. 35)
!0 PRIORITY WATCH INDICATOR (p. 44)
Appears while the priority watch is activated; blinks while
the watch is paused.
!1 LOCK INDICATOR (p. 12)
Appears when the lock function is activated.
!2 TONE INDICATORS
➥ " " appears while the subaudible tone encoder is in
use. (p. 17)
➥ " " appears while the tone
in use. (p. 48)
➥ " " appears while the tone
in use. (p. 48)
➥ " " appears with the " " or " " indicator while the
pocket beep function
(CTCSS or DTCS)
squelch function is
(CTCSS)
squelch function is
(DTCS)
is in use. (p. 48)
PANEL DESCRIPTION
!3 DUPLEX INDICATORS (p. 17)
"+" appears when plus duplex, "–" appears when minus
duplex operation is selected.
!4 AUTO POWER-OFF INDICATOR (p. 64)
Appears while the auto power-off function is in use.
!5 NARROW MODE INDICATOR (p. 61)
Appears when the narrow mode is selected.
Narrow mode is available with some USA versions only.
1
1
4