Specifications And Options; Specifications - Icom IC-M85E Instruction Manual

Vhf marine transceivers
Hide thumbs Also See for IC-M85E:
Table of Contents

Advertisement

10

SPECIFICATIONS AND OPTIONS

■ Specifications

All stated specifications are subject to change without notice
or obligation.
IC-M85 (USA, Export):
D General
• Frequency coverage:
Marine
LMR
• Mode:
Marine
LMR
• Channel spacing:
Marine
LMR
• Current drain (at 7.2 V DC):
• Frequency stability:
• Operating temperature range:
Marine
LMR
• Dimensions (projections not included):
• Weight (approximately):
• Antenna impedance:
23
Measurements made without an antenna.
TX
156.025 ~ 157.425 MHz
RX
156.050 ~ 163.275 MHz
136.000 ~ 174.000 MHz
16K0G3E
16K0F3E (Wide)/11K0F3E (Narrow)
±25 kHz
±25 kHz (Wide), ±12.5 kHz (Narrow)
TX High (5 W) 1.5 A typical
Maximum audio 450 mA typical
±5.0 ppm
–20˚C ~ +60˚C, –4˚F ~ +140˚F
–30˚C ~ +60˚C, –22˚F ~ +140˚F
56 (W) × 92 (H) × 29 (D) mm,
2.2 (W) × 3.6 (H) × 1.1 (D) inches
215 g, 7.6 oz with BP-290
50 ˘ nominal
D Transmitter
• Output power:
Marine
5 W (Hi), 3 W (Mid), and 1 W (Low)
LMR (USA)
2 W (Hi), 1 W (Low)
LMR (Export/Chinese)
5 W (Hi), 3 W (Mid), and 1 W (Low)
• Modulation system :
Variable reactance frequency modulation
• Maximum frequency deviation:
Marine
±5 kHz
LMR
±5 kHz (Wide), ±2.5 kHz (Narrow)
• Audio harmonic distortion:
Less than 10% (at 60% deviation)
• Spurious emissions:
Less than –70 dBc typical
D Receiver
• Receive system:
Double conversion superheterodyne
• Sensitivity (at 12 dB SINAD): 0.25 μV (typical)
• Squelch sensitivity (Threshold): 0.35 μV (typical)
• Intermodulation rejection ratio: 70 dB (typical)
• Sprious response rejection ratio: 70 dB (typical)
• Adjacent channel selectivity: 70 dB (typical)
55 dB (typical) (Narrow, LMR only)
• Ham and Noise ratio:
40 dB
34 dB (Narrow, LMR only)
• Audio output power:
0.7 W typical at 10% distortion into a
12 ˘ load

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ic-m85Ic-m85ul

Table of Contents