I Calling Up Memory Channels - Icom IC-T90A Instruction Manual

I Calling up memory channels

Memory channels can be selected with
the [DIAL] and keypad.
• Blank channels cannot be selected via
[DIAL].
• Blank channels can be selected via key-
pad.
• Previously selected channels appear
when the wrong memory channel num-
ber is entered.
[DIAL]
[MR S.MW]
keypad
1 2 3
V D TONE H / L
4 5 6 0
DUP SKIP M.N RIT
7 8 9
T.SCAN SET TS
D Selecting with tuning dial
q Push [MR] to select memory mode.
w Rotate [DIAL] to select the desired
memory channel.
Memory mode indication
FM
Memory channel number
D Selecting with keypad
q Push [MR] to select memory mode.
w Push the desired numeral keys to
select the desired memory channel.
• Selecting memory channel 001.
Push [0], [0] and [1].
• Selecting memory channel 056.
Push [0], [5] and [6].
• Selecting memory channel 499.
Push [4], [9] and [9].
MEMORY/CALL CHANNELS
➲ CONVENIENT
The memory channels (000–099) can
be selected with 1 or 2 digits plus [MR].
• Selecting memory channel 005.
Push [5] and [MR].
• Selecting memory channel 024.
Push [2], [4] and [MR].
Appears
D Check contents of all
memory channels
q Push [MR S.MW] for 1 sec. to enter
memory write condition.
• Memory channel readout blinks.
FM
w Rotate [DIAL] to check the desired
memory channel.
Rotating
[BAND] also selects all memory
channels.
5
[DIAL] while pushing
t t
36