Basic Operation; I Turning Power On - Icom IC-T90A Instruction Manual

4

BASIC OPERATION

I Turning power ON

D Turning power ON
q Make sure alkaline batteries are installed in the battery
case or the battery pack is charged, and attach them.
(p. 13)
w Push [PWR] for 1 sec. to turn the power ON.
• The function display shows "ICOM," current voltage then the op-
erating frequency.
• Repeat this step to turn power OFF.
The opening message can be turned ON or OFF in the ex-
panded set mode 1. (p. 64)
[PWR]
17
Opening message 'ICOM'
Voltage indication
Frequency indication
FM P SKIP
D Setting volume level
The audio level can be adjusted through 32 levels.
➥ Push [Y] or [Z] to set the desired audio level.
• Rotating the tuning dial while pushing [Y] or [Z] also sets the
audio level.
• [Y]/[Z] and [DIAL] can be exchanged by [1 V↔D]. (p. 23)
[ ∫ ]
[ √ ]
D Volume level indication
The frequency display shows the volume level during setting
as shown below.
Indication
Shows volume level.
Audio level
0 (no sound)
1–11
12–18
19–23 (default)
24–27
28–30
31 (Maximum)