Icom IC-T90A Instruction Manual page 59

D VFO scan with call channel watch
While scanning in VFO mode, priority watch checks for sig-
nals in the selected call channel every 5 sec.
q Select VFO mode.
w Push [CALL/TV] to select call channel mode.
e Rotate [DIAL] to select the desired call channel.
r Push [8 SET] for 1 sec. to enter set mode.
t Rotate [DIAL] until "PRIO" appears.
y Push [8 SET] to select the priority watch item.
u Rotate [DIAL] to select the priority watch ("ON") or priority
watch with alert ("BELL").
i Push [VFO] to exit set mode and start the priority watch.
o Push [MODE SCAN] for 1 sec. to start a VFO scan. (full
scan, band scan or programmed scan)
!0 Push [VFO] while the display shows the VFO frequency to
stop the VFO scan and priority watch.
51.000
850.000
VFO scan
Call channel
433.500
FM
Watches call Ch
while VFO scanning.
433.000
Pauses when a signal
is received in call Ch.
145.280
145.260
145.100
145.120
145.140
PRIO
5 sec.
145.200
145.220
145.240
7
PRIORITY WATCH
u u
54