Gs B N - Citizen BD2-2220 Command Reference Manual

GS B n

support model
[Function] Specifying/canceling the black/white inverted printing
[Code]
<1D>H<42>H<n>
[Range] 0≦n≦255
[Outline] [The specification which is common to the model]
This command specifies or cancels the black/white inverted printing.
• "n" is valid only for the lowest bit (n0).
• Control by the lowest bit (n0) is shown as follows:
n0
0
1
[Caution] • The black/white inversion works on internal and downloaded characters.
• The black/white inversion works also on the right spacing of characters defined by ESC SP.
• This command does not affect the bit image, downloaded bit image, bar code, HRI characters, or
the skip area specified by HT, ESC $, or ESC ＼.
• This command does not affect the space between lines.
• Black/white inversion specification takes precedence over underline specification. Underline
printing specified is, therefore, nullified if black/white inversion is specified; the underline setting,
however, remains unchanged.
[Default] n=0
CT-S280 CT-S300
PMU2XXX
The black/white inverted printing is canceled.
The black/white inverted printing is specified.
CT-S2000 CT-S4000
Function
- 59 -
BD2-2220 CT-S310