Kanji Control Commands; Fs ! N - Citizen BD2-2220 Command Reference Manual

2.2.14 Kanji Control Commands

FS ! n

support model
[Function] Collectively setting Kanji print mode
[Code]
<1C>H<21>H<n>
[Range] 0≦n≦255
[Outline] [The specification which is common to the model]
Collectively sets Kanji print mode.
Each bit of "n" has the following meaning:
[Caution] • Setting both double-height and double-width enlargement causes four times enlargement.
• Underline is applied to all width of printed characters but not to the part skipped by HT. Underline
is not applied to the character rotated by 90° clockwise.
• Thickness of underline is the value set by FS – (defaulted to 1 dot width).
[Default] n=0
[See Also] FS -、FS W、GS !
CT-S280 CT-S300
PMU2XXX
Bit Function
0 Undefined
1 Undefined
2 Double-width enlargement
3 Double-height enlargement
4 Undefined
5 Undefined
6 Undefined
7 Underline
CT-S2000 CT-S4000
Value
0
―
―
Canceled
Canceled
―
―
―
Canceled
- 132 -
BD2-2220 CT-S310
1
―
―
Specified
Specified
―
―
―
Specified