Esc P M N1 N2 - Citizen BD2-2220 Command Reference Manual

ESC p m n1 n2

support model
[Function] Generating the specified pulses
[Code]
<1B>H<70>H<m><n1><n2>
[Range] m=0、1、48、49
0＜n1≦n2≦255
[Outline] [The specification which depend on the model]
• The signals specified by "n1" and "n2" are output to the connector pin specified by "m".
• "m" has the followings.
m
0, 48
1, 49
• The ON time is n1 x2 ms, and OFF time n2 x2 ms.
[Caution] • When "m" is beyond a definition range, no signal is output, discarding "n1" and "n2".
• The drawer drive duty must be within the following range:
[Sample Program]
LPRINT CHR$(&H1B) + "p"
LPRINT CHR$(0);
LPRINT CHR$(5);
LPRINT CHR$(50);
CT-S280 CT-S300
PMU2XXX
Connector Pin
Drawer kick-out pin No. 2
Drawer kick-out pin No. 5
ON time
ON time＋OFF time
(The OFF time should be 4 times or more longer than the ON time.)
･････ Selects pin No. 2.
･････ Sets ON time to 10 ms
･････ Sets OFF time to 100 ms
CT-S2000 CT-S4000
≦ 0.2
- 226 -
BD2-2220 CT-S310