Installing Or Removing A Memory Card - Ricoh InfoPrint 1570 User Manual

Installing or removing a memory card

Installation
Note: MFP or printer memory cards designed for other printers or MFPs may not work with this MFP.
1
Remove the system board access cover. (See Accessing the MFP system board.)
Warning: MFP memory cards are easily damaged by static electricity. Touch something metal such as the MFP
frame before you touch a memory card.
2
Push open the latches on both ends of the memory card connector.
3
Unpack the memory card.
Avoid touching the connection points along the edge of the card. Save the packaging.
4
Align the notches on the bottom of the card with the notches on the connector.
5
Push the memory card firmly into the connector until the latches on either end of the connector snap into place.
It may require some force to fully seat the card.
6
Make sure each latch fits over the notch on the end of the card.
Memory connector
Memory card
Installing and removing options
Installing or removing a memory card
87