Access Doors And Trays; Understanding Jam Messages - Ricoh InfoPrint 1570 User Manual

Access doors and trays

The following illustration shows the path that print media travels through the MFP. The path varies depending on the input
source (trays, multipurpose feeder, envelope feeder) you are using.
The numbers in following illustration indicate the numbers that can appear on the control panel and designate the general
area of a paper jam.
202 Paper
Jam
23x Paper
Jam
Doors and trays
CAUTION:
a printer stand or printer base if you are using a 2000-sheet drawer. Certain other configurations also
must have a printer stand or printer base.

Understanding jam messages

The following table lists the jam messages that can occur and the action necessary to clear the message. The jam
message indicates the area where the jam occurred. However, it is best to clear the entire paper path to ensure you have
cleared all possible jams.
Message
200 and 201 Paper Jam Remove
Cartridge
202 Paper Jam Open Rear Door
23x Paper Jam Check Duplex
24x Paper Jam Check Tray <x>
250 Paper Jam Check MP Feeder
Clearing jams
200 Paper Jam
201 Paper Jam
260 Paper Jam
250 Paper Jam
23x Paper Jam
24x Paper Jam
Floor-mounted configurations require additional furniture for stability. You must use either
What to do*
Open the bottom then top front covers, remove the print cartridge, and then
remove the jam.
Open the rear door on the MFP, and remove the jam.
Remove the duplex tray from the duplex unit, raise duplex deflector, and
remove the jam. Open the rear duplex door, and remove the jam.
Open each tray, and remove any jammed media.
Remove all media from the multipurpose feeder, flex and stack the media,
reload the multipurpose feeder, and adjust the guide.
Access doors and trays
101
202 Paper
Jam
23x Paper
Jam
Path and locations
201 Paper
Jam
200 Paper
Jam
260 Paper
Jam
250 Paper
Jam
23x Paper
Jam
24x Paper
Jam