Chapter 2 Connection; Connecting Cables - Eizo Radiforce GX550-P Instructions For Use Manual

Chapter 2 Connection

2-1. Connecting Cables

Attention
• Check that the monitor and the PC are powered off.
• When replacing the current monitor with this monitor, refer to "1-5. Compatible Resolutions" (page 13) to
change the PC settings for resolution and vertical scan frequency to those that are available for this monitor,
before connecting the PC.
1.
Turn the monitor screen 90˚ in clockwise direction.
The landscape position is the default monitor orientation.
Attention
• Before turning the monitor screen, raise it to the highest position.
2.
Connect signal cables.
Check the shapes of the connectors, and connect the cables. After connecting the DVI cable, tighten
the fasteners to secure the connector.
Connecting to a single PC
Attention
• The DisplayPort connectors of the monitor consist of input
PC, connect the cable to input connector
14
Chapter 2 Connection
.
Signal cable :
DD300DL
or
Signal cable : PP300
and output . When connecting a monitor to a