Wash Cycle Options - Fisher & Paykel WH2424P Installation Manual/User Manual

All wash cycles default to the recommended options for that cycle based on the average
expected load to be washed. You can vary the options (eg 'Wash Temp', 'Spin Speed')
to create your desired cycle. Note: some options are not available on some cycles, for
clothes care reasons, or because the option is not appropriate for the cycle.
To change a wash option or options you have selected after a cycle has started, touch
and select your new setting, then touch
setting or settings. Note: some options may not be available for selection under certain
conditions and after particular stages of the cycle have passed.
Wash Temp
Your washer offers five wash temperatures:
Cold
Simply touch the 'Wash Temp' button to increase or decrease the wash temperature.
●
The washer will fill with both hot and cold water (if possible) to achieve the selected
●
wash temperature.
Some temperatures are not available on some cycles as a safeguard for your clothes
●
(eg 'Extra Hot' on the 'Delicate' cycle).
IMPORTANT!
When 'Extra Hot' temperature is selected, the door glass will become hot. Do not
touch the glass part of the door. Keep children away from the washer.
Time Saver (WH2424F model only)
Your washer offers a 'Time Saver' feature that when selected adjusts the cycle
programming, by combining special temperature profiling and a unique tumble
sequence. The result – excellent wash performance combined with time savings.
This option can be selected on the 'Everyday', 'Cottons', 'Heavy', 'Perm Press', 'Sanitize',
'Sports' and 'Quick 30' cycles.
Please be aware that a number of factors can influence the amount of time saved on a cycle,
including the load size, cycle chosen, water flow rate and load distribution during spin.
Spin Speed
Your washer offers four spin speeds: 500 rpm, 800 rpm, 1100 rpm and 1400 rpm, plus
●
an additional 'No Spin' option.
Simply increase or decrease the spin speed by touching the 'Spin Speed' button.
●
Selecting 'No Spin' will end the cycle after the rinse, allowing you to remove items you
●
wish to drip dry. Note: the washer will complete the default wash and rinse spins for
the cycle; only the final spin will not be completed. If you have removed the items you
wish to drip dry and there are items remaining that you would like to proceed to spin,
press 'POWER' and select the 'Spin' cycle. If necessary, modify the spin speed to best
care for your load (ie spin delicate items at 500 rpm for best garment care).
34

WASH CYCLE OPTIONS

Cool Warm
again to resume the cycle with the new
Hot Extra Hot