Wash Cycle Options - Fisher & Paykel WH9060J Installation Manual/User Manual

Wash cycle options

All wash cycles default to the recommended options for that cycle based on the average
expected load to be washed. You can vary the options (eg 'Wash Temp', 'Spin Speed') to
create your desired cycle. Some options are not available on some cycles, for clothes care
reasons, or because the option is not appropriate for the cycle.
To change a wash option or options you have selected after a cycle has started
Touch and select your new setting, then touch
z
new setting or settings.
Note: Some options may not be available for selection under certain conditions and after
particular stages of the cycle have passed.
Wash Temp
Your washer offers five wash temperatures:
Cold
Simply touch the 'Wash Temp' button to increase or decrease the wash temperature.
z
The washer will fill with both hot and cold water (if possible) to achieve the selected
z
wash temperature. If required, ie for cold supply or cold connection only, the washer will
heat the water to the selected temperature.
Some temperatures are not available on some cycles as a safeguard for your clothes
z
(eg 90°C on the 'Delicate' cycle).
Note: If the wash temperature is set to cold the washing machine will heat the water to
20°C using the internal heater. This is to ensure that the detergent is fully dissolved during
the wash cycle.
Time Saver (WH8560F and WH8060F models only)
Your washer offers a 'Time Saver' feature that when selected adjusts the cycle
programming, by combining special temperature profiling and a unique tumble sequence.
The result – excellent wash performance combined with time savings.
This option can be selected on the 'Everyday', 'Cottons', 'Heavy', 'Easy Iron', 'Allergy' and
'Sports' cycles.
Please be aware that a number of factors can influence the amount of time saved on
a cycle, including the load size, cycle chosen, water flow rate and load distribution
during spin.
WASH CYCLE OPTIONS
30°C 40°C
again to resume the cycle with the
60°C 90°C
27