Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Fisher & Paykel Manuals
  4. Washer
  5. WH2424P1
  6. Quick start manual

Fisher & Paykel WH2424P1 Quick Start Manual

Hide thumbs Also See for WH2424P1:
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual
Wash Cycle Options
All wash cycles default to the recommended options for that cycle based on the average expected load to be washed.
You can vary the options (eg 'Wash Temp', 'Spin Speed') to create your desired cycle.
Some options are not available on some cycles, for clothes care reasons, or because the option is
not appropriate for the cycle.
To change a wash option or options you have selected after a cycle has started, touch
and select your new setting, then touch
again to resume the cycle with the new setting or settings.
Some options may not be available for selection under certain conditions and after particular stages
of the cycle have passed.
Wash Temp
Your washer offers five wash temperatures:
• Cold
• Cool
• Warm
• Hot
• Extra Hot
▪ Simply touch the 'Wash Temp' button to increase or decrease the wash temperature.
https://producthelp.fisherpaykel.com/us/Wash/Front_Loaders/WashSmart/WH2424P1/User_Guide_WH2424P1/11_wash_cycl...
Updated: Tue, 16 Nov 2021 12:13:06 GMT
Powered by
1

Advertisement

loading

Related Manuals for Fisher & Paykel WH2424P1

Summary of Contents for Fisher & Paykel WH2424P1

  • Page 1 Your washer offers five wash temperatures: • Cold • Cool • Warm • Hot • Extra Hot ▪ Simply touch the ‘Wash Temp’ button to increase or decrease the wash temperature. https://producthelp.fisherpaykel.com/us/Wash/Front_Loaders/WashSmart/WH2424P1/User_Guide_WH2424P1/11_wash_cycl… Updated: Tue, 16 Nov 2021 12:13:06 GMT Powered by...

  • Page 2: Spin Speed

    For extra dirty loads you can perform a ‘Pre Wash’. Your washer will start the wash with a short wash in cool water to remove excess soil. After this the machine will drain and then fill at the selected temperature for the main wash. https://producthelp.fisherpaykel.com/us/Wash/Front_Loaders/WashSmart/WH2424P1/User_Guide_WH2424P1/11_wash_cycl… Updated: Tue, 16 Nov 2021 12:13:06 GMT...
  • Page 3 The ‘Steam’ option cannot be selected after a wash cycle has been started, ie if you touch and try to select ‘Steam’ it will be unavailable. ‘Steam’ must be selected at the start of the cycle. https://producthelp.fisherpaykel.com/us/Wash/Front_Loaders/WashSmart/WH2424P1/User_Guide_WH2424P1/11_wash_cycl… Updated: Tue, 16 Nov 2021 12:13:06 GMT Powered by...
  • Page 4 This option will not be available if ‘Rinse +’ has been selected. • If you wish to, you can select both the ‘Pre Wash’ and ‘Rinse+’ ‘Wash Boost’ options to perform on the same https://producthelp.fisherpaykel.com/us/Wash/Front_Loaders/WashSmart/WH2424P1/User_Guide_WH2424P1/11_wash_cycl… Updated: Tue, 16 Nov 2021 12:13:06 GMT...
  • Page 5 To Turn Keylock Mode ON or OFF when the Washer is Powered On: • Touch and hold the button for 2 seconds. When activated, the light above the button is illuminated. displayed on the display panel. https://producthelp.fisherpaykel.com/us/Wash/Front_Loaders/WashSmart/WH2424P1/User_Guide_WH2424P1/11_wash_cycl… Updated: Tue, 16 Nov 2021 12:13:06 GMT Powered by...

  • Page 6: Delay Start

    (more convenient than touching the button repetitively). To remove a ‘Delay Start’ time once it is counting down, simply touch , then touch the ‘Less’ https://producthelp.fisherpaykel.com/us/Wash/Front_Loaders/WashSmart/WH2424P1/User_Guide_WH2424P1/11_wash_cycl… Updated: Tue, 16 Nov 2021 12:13:06 GMT Powered by...
  • Page 7 Touch to start the cycle immediately. We suggest that you avoid using ‘Delay Start’ for damp, non-colorfast items as this may cause dye run to occur. https://producthelp.fisherpaykel.com/us/Wash/Front_Loaders/WashSmart/WH2424P1/User_Guide_WH2424P1/11_wash_cycl… Updated: Tue, 16 Nov 2021 12:13:06 GMT Powered by...