Wash Cycle Options - Fisher & Paykel WashSmart Installation Instructions And User Manual

Front loading clothes washer
Table of Contents

Advertisement

Wash cycle options

EN
22
All wash cycles default to the recommended options for that cycle based on the average
expected load to be washed using that cycle. You can vary the options (eg WASH TEMP,
SPIN SPEED) to create your desired cycle. Note: some options are not available on some cycles,
for clothes care reasons, or because the option is not appropriate for the cycle.
To change a wash option or options you have selected after a cycle has started, touch
START / PAUSE and select your new setting, then touch START / PAUSE again to resume the cycle
with the new setting or settings. Note: some options may not be available for selection under
certain conditions and after particular stages of the cycle have passed.
Wash Temp
Your washer offers five wash temperatures:
Cold
Simply touch the WASH TEMP button to increase or decrease the wash temperature.
■ ■
The washer will fill with both hot and cold water to achieve the selected wash temperature. If
■ ■
required the washer will heat the water to the selected temperature.
Some temperatures are not available on some cycles as a safeguard for your clothes (eg 60°C and
■ ■
90°C on the HANDWASH cycle).
Spin Speed
Your WashSmart™ washer offers four spin speeds: 500 rpm, 800 rpm, 1100 rpm and 1400 rpm,
■ ■
plus an additional NO SPIN option.
Your QuickSmart™ washer offers three spin speeds: 500 rpm, 800 rpm, 1100 rpm, plus an
■ ■
additional NO SPIN option.
Simply increase or decrease your spin speed by touching the SPIN SPEED button.
■ ■
Selecting NO SPIN will end the cycle after the rinse, allowing you to remove items you wish to
■ ■
drip dry. Note: the washer will complete the default wash and rinse spins for the cycle; only the
final spin will not be completed. If you have removed the items you wish to drip dry and there
are items remaining in the load that you would like to proceed to spin, press POWER and select
the SPIN cycle. If necessary modify the spin speed to best care for your load (ie spin delicate
items at 500 rpm for best garment care).
Soil Level (WashSmart™ only)
The SOIL LEVEL option lets you adjust the wash to suit the amount of soil in your load. For example,
select HEAVY for dirty clothes; for items that are only lightly soiled, select LIGHT. This adjusts the
wash time accordingly to give the load the right amount of agitation to remove the soil.
30°C
40°C
60°C
90°C

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Quicksmart

Table of Contents