P/N 0463880_E
Remove
Screw from
Each End of
Raceway
Raceway Access at Left Hand End
Canopy and Shelf Lamp Ballasts
These ballast are located at the top of the
merchandiser inside the canopy.
1. D
ISCONNECT POWER TO THE MERCHANDISER
2. Remove fluorescent lamps from the canopy.
3. Remove the screws that secure the lamp
panel.
6 ft & 8 ft
LH Shelves
12 ft
LH Shelves
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
RH Shelves
Center Shelves
Canopy and Shelf Ballast Arrangement
Remove Front Lamp Assembly to Access Screws
Access to Canopy and Shelf Ballasts
.
4. Grasp the lamp panel at its front edge and
carefully pull down. It will swing freely from
its hinged rear edge.
5. Replace ballast and reassemble parts in
reverse order.
6. Reconnect the electrical power.
Canopy
RH Shelves
Remove Screws
(3 on 8 ft case,
4 on 12 ft case)
Canopy
Medium Temperature
6-5
Excel