P/N 0463880_E
CARE AND CLEANING
Long life and satisfactory performance of any
equipment is dependent upon the care it receives.
To ensure long life, proper sanitation and mini-
mum maintenance costs, these merchandisers
should be thoroughly cleaned, all debris removed
and the interiors washed down, weekly.
Fan Plenum
To facilitate cleaning, the fan plenum is hinged.
After cleaning be sure the plenum is properly
lowered into position
due to improper refrigeration.
RESULT
WARNING
!
SHUT FANS OFF DURING
CLEANING PROCESS.
Removable Return Air Grille
The return air grille may be removed to facilitate
cleaning. Simply lift a four foot section up and
out as shown below.
Glass
Front
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
MAINTENANCE
OR PRODUCT LOSS WILL
Removable
Return Air
Grille
WARNING
!
Do not use HOT water on COLD glass surfaces.
This can cause the glass to shatter and could
result in personal injury. Allow glass fronts,
ends and service doors to warm before applying
hot water.
Fascia Panels
The fascia panels lift
out, left to right, and
should be cleaned with
a mild detergent and
warm water.
D
O NOT USE AMMONIA
BASED PRODUCTS TO
CLEAN OPTIONAL
.
ACRYLIC PANELS
N
EVER USE ABRASIVE
CLEANSERS OR
.
SCOURING PADS
Exterior Surfaces
The exterior surfaces must be cleaned with a mild
detergent and warm water to protect and maintain
their attractive finish. N
CLEANSERS OR SCOURING PADS
Interior Surfaces
The interior surfaces may be cleaned with most
domestic detergents, ammonia based cleaners and
sanitizing solutions with no harm to the surface.
Always read and follow the manufacturer's
instructions when using any cleaning product.
WARNING
!
Do NOT allow product to sit in an
un-refrigerated area.
Medium Temperature
-
EVER USE ABRASIVE
.
Excel
5-1