Hussmann Impact Excel M5X Installation And Service Manual page 19

P/N 0463880_E
3. Fasten End Assembly to Merchandiser
a. Use Bolt and washer to fasten end
assembly to merchandiser
b. Use washer with Hex Nut to secure bolt
and washer at front (A) and canopy (F), sim-
ilar to joining process.
A continuous bead of silicone
sealant/ caulk may be used
in addition to gaskets on the
end frame surfaces but must
not be used in lieu of gaskets.
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
Flat Washer
5
/ -WI Zinc
16
Cap Screw
5 3
/ -18 x 1 /
16 4
End Assembly
Cap Screw
5 1
/ -18 x 2 /
16 2
Plug Button
c. Tighten in order shown on Page 1-14.
After fasteners have been tightened, insert
Plug Buttons.
Medium Temperature
1-15
Excel