Subnet Manager - Cisco SFS 7024 Hardware User's Manual

Subnet Manager

Every InfiniBand fabric subnet requires a single active Subnet Manager (SM) to initialize and maintain
the subnet. The fabric may also have one or more standby Subnet Managers. One of the standby Subnet
Managers can be configured to become the active SM in the event of a failure.
As Figure 1-2 shows, InfiniBand-enabled fabrics consist of one or more subnets. Each subnet consists
of a number of InfiniBand-capable servers connected to target devices. InfiniBand-capable routers
provide connectivity between InfiniBand subnets.
Figure 1-2
Subnet A
When a network is initially powered up, the Subnet Manager queries the subnet management agents
running on the network devices, for information about node/port addressing schemes, routing tables and
partitions. From that point on, the Subnet Manager periodically sweeps the network for changes. Once
the InfiniBand network is up and running, the InfiniBand General Services Managers (GSMs) begin to
interface with General Services Agents (GSAs).
Cisco SFS 7024 InfiniBand Server Switch Hardware Users Guide
4
– Reset the logs
Perform maintenance tasks
–
Manage firmware updates, including uploading new firmware and setting the active version.
–
Subnet Manager
InfiniBand
Subnet Manager
for Subnet A
InfiniBand
Subnet Manager
for Subnet B
Router
Router
Subnet B
HCA
InfiniBand
Capable Server
HCA
InfiniBand
Capable Server
SFS 7024
IB Port
IB Port
IB Port
IB Port
IB Port
IB Port
IB Port
IB Port
Chapter
OL-8794-04