Table of Contents
Advertisement
Figure 9
Step 7
Using two screws, install the lower mounting bracket to the rail assembly and chassis as shown in
Figure
Figure 10
Step 8
Install the heyclip to the rail assembly.
Step 9
If applicable, reinstall the chassis fascia(s).
Installing the Switch Face Plate
To install the switch face plate(s):
On the switch fan side, insert the notches on the top of the fascia into the two slots on the chassis frame.
Step 1
Snap the bottom of the faceplate in place.
Cisco SFS 7024 InfiniBand Server Switch Hardware Users Guide
24
Completed Top Rail Assembly
10.
Install the Lower Mounting Bracket and Heyclip
Install the
heyclip here
Install the lower rear
mounting bracket to the rail
assembly and chassis
Chapter
OL-8794-04
Advertisement
Table of Contents
