Firmware; Log; Keymanagement; Snmp - Cisco SFS 7024 Hardware User's Manual

Firmware

fwUpdateSlot
fwUpdateChassis
fwListFiles
fwShowUpdateParams
fwSetUpdateParams
showCapability
fwVersion
bootQuery
bootSelect

Log

logShow
logClear
logConfigure
When configuring log devices (option 1), do not change settings for the following devices:
Note
logSaveAsDefault
logResetToDefaults
logSyslogConfig
logShowConfig

KeyManagement

showKeys
addKey
removeKey
Cisco SFS 7024 InfiniBand Server Switch Hardware Users Guide
92
Update units firmware
Update units firmware
Lists the contents of the firmware RAM disk
Display firmware default update parameters
Configure firmware default update parameters
Display the capabilities/features
Display Firmware revisions
Query boot image information
Change boot selection
Display the Log file
Clear the Log file
Configure the log settings
BriefRam: Changes will have no effect.
Console: This device changes log messages that are displayed on the RS232 port.
Trap: Modifying traps may have adverse effects if the device is configured to send traps to a
SNMP management station. By default it is configured to send traps. Enabling additional log
levels will have no effect, but disabling log levels will prohibit traps from being sent.
These devices are for internal use only.
Save current log level settings as the defaults
Restore the log default settings
Configure the syslog host address
Display the current log configuration
Display the list of installed license keys
Install a license key
Remove a license key
Appendix
OL-8794-04